E-mail this page Print this page

Supplying FRP Fabricators for over 50 years

Any questions? Call 800-330-9552 or Contact us by email.
Home » Product » Resin fiber discs, heavy-duty

Resin fiber discs, heavy-duty

Camel semi-flex discs, CGW discs, ZEC abrasive discs, ZEC semiflex silicon carbide discs, ZEC plastic litex discs, sanding discs, grinding discs, abrasive discs, resin fiber discs, and resin fibre discs.

Disc holders for these discs are listed on our Pads for discs with center holes page. Other additional abrasive discs are shown on our Discs page.

SAFETY WARNING: Make sure that the maximum RPM of the disc you choose below, and also the backing pad you are using, are both more than the maximum RPM of the power tool you are using.

WARNING:

This product can expose you to chemicals including glass wool fibers (inhalable and biopersistent), crystalline silica (airborne particles of respirable size) and formaldehyde, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. This warning applies to all Camel and CGW Camel semi-flex discs shown below.

Discs that require a backing pad

See other discs shown below that include an attached, integral plastic backing. Those discs at the bottom of this page do not require any additional backing pads.

Camel semi-flex discs

For aggressive grinding. T29 domed shape silicon carbide (C) resin fiber disc for non-ferrous materials such as fiberglass, marble, enamels, porcelain, China clay, and for removing epoxy, glue or urethane. Must use a backing pad. The most popular silicone carbide sizes are listed below. Sold by the pack, 5/pack.

Item
Number
Item
Description
Max.
RPM
Each
Price
25 ea
Price
100 ea
Price
500 ea
Price
 
F4115A41/2" x 7/8" x 16 grit13,300Add to cart | Add to list
F4115B41/2" x 7/8" x 24 grit13,300Add to cart | Add to list
F4115C41/2" x 7/8" x 36 grit13,300Add to cart | Add to list
F4115E41/2" x 7/8" x 60 grit13,300Add to cart | Add to list
F4117A7" x 7/8" x 16 grit8,600Add to cart | Add to list
F4117B7" x 7/8" x 24 grit8,600Add to cart | Add to list
F4117C7" x 7/8" x 36 grit8,600Add to cart | Add to list
F4117E7" x 7/8" x 60 grit8,600Add to cart | Add to list

ZECĀ® abrasive discs

ZEC discs acquire flexibility a few minutes after being used: flexibility cannot be tested by hand in a cold condition. Flexibility deadens vibration and reduces operator fatigue. Just exert a slight pressure while working. Perforated holes prevent work piece from overheating and ejects scraps. ISO 9001 approved. European Standard EN13743. Most popular sizes are listed below. Other silicone carbide and aluminum oxide diameters and grits are shown on our Other ZEC disc options page.

2.0 mm thick fiber backing and multiple layers of first-rate silicon carbide abrasive. This style disc is intended to be mounted on hand grinding machines with a proper backing pad.

ZEC dome shape semiflex discs

Silicone carbide grit. Sold by the pack, 5/pack.

Item
Number
Item
Description
Max.
RPM
Each
Price
25 ea
Price
100 ea
Price
500 ea
Price
 
F4022C41/2" x 7/8" x 16 grit13,300Add to cart | Add to list
F4022D41/2" x 7/8" x 24 grit13,300Add to cart | Add to list
F4022E41/2" x 7/8" x 36 grit13,300Add to cart | Add to list
F4025C7" x 7/8" x 16 grit8,500Add to cart | Add to list
F4025D7" x 7/8" x 24 grit8,500Add to cart | Add to list
F4025E7" x 7/8" x 36 grit8,500Add to cart | Add to list

ZEC flat shape semiflex discs

Silicone carbide grit. Sold by the pack, 5/pack.

Item
Number
Item
Description
Max.
RPM
Each
Price
25 ea
Price
100 ea
Price
500 ea
Price
 
F4012C41/2" x 7/8" x 16 grit13,300Add to cart | Add to list
F4012D41/2" x 7/8" x 24 grit13,300Add to cart | Add to list
F4012E41/2" x 7/8" x 36 grit13,300Add to cart | Add to list

Discs that do not require a backing pad

Two discs shown below include an integral, attached plastic backing. They do not require any additional backing pads. Both discs are constructed with the backing pad being part of the disc.

CGW Camel type 27 semi-flex discs

No backing pad needed. These heavy-duty semi-flex silicon carbide discs are constructed with an attached plastic backing for aggressive grinding. Suitable for fiberglass, non-ferrous metals, stone, brick, masonry, concrete prep work and floor coating removal. Made for unlimited storage life. No deformation due to use, heat, or humidity. Disc is a flat shape with a depressed center. Other finer grits available. Can be used wet or dry. Sold by the pack, 5/pack.

Item
Number
Item
Description
Max.
RPM
Each
Price
25 ea
Price
100 ea
Price
500 ea
Price
 
F4180A41/2" x 7/8" x 16 grit13,300Add to cart | Add to list
F4180B41/2" x 7/8" x 24 grit13,300Add to cart | Add to list
F4180C41/2" x 7/8" x 36 grit13,300Add to cart | Add to list
F4181A5" x 7/8" x 16 grit12,250Add to cart | Add to list
F4181B5" x 7/8" x 24 grit12,250Add to cart | Add to list
F4181C5" x 7/8" x 24 grit12,250Add to cart | Add to list
F4182A5" x 7/8" x 16 grit8,600Add to cart | Add to list
F4182B7" x 7/8" x 24grit8,600Add to cart | Add to list
F4182C7" x 7/8" x 36 grit8,600Add to cart | Add to list

ZEC Plastic Litex discs

No backing pad needed. These discs are constructed with an attached plastic backing for aggressive grinding. They fit directly onto the hand grinding machine. ZEC Plastic discs can be used wet and underwater. Reduces the cost of grinding operations because no backing pad is needed. Discs listed below are the most popular sizes of silicon carbide grit. Sold by the pack, 5/pack.

Item
Number
Item
Description
Max.
RPM
Each
Price
25 ea
Price
100 ea
Price
500 ea
Price
 
F4052B41/2" x 7/8" x 12 grit13,300Add to cart | Add to list
F4052C41/2" x 7/8" x 16 grit13,300Add to cart | Add to list
F4052D41/2" x 7/8" x 24 grit13,300Add to cart | Add to list
F4052E41/2" x 7/8" x 36 grit13,300Add to cart | Add to list
F4053C5" x 7/8" x 16 grit12,000Add to cart | Add to list
F4055B7" x 7/8" x 12 grit8,500Add to cart | Add to list
F4055C7" x 7/8" x 16 grit8,500Add to cart | Add to list
F4055D7" x 7/8" x 24 grit8,500Add to cart | Add to list
F4055E7" x 7/8" x 36 grit8,500Add to cart | Add to list